Download a three-page article from Electronics World “Hi Fi Annual & Audio Handbook 1960” which details the construction of a 4-channel tube mixer:
DOWNLOAD: Tube_Mix_It_Box_1960
“Electronics World” Magazine published these ‘hi-fi annuals’ in the late 50s/early 60s; from what i can gather, they seem to be collections of reprints of the notable audio-content that EW published in the prior year. I picked up this 1960 edition a few years ago in the excellent Antiques Mall of Madison; some excellent vinyl LPs and rare paper dealers as well.
Anyhow. This mixer has some interesting features; nice simple circuit for calibration pot for DB meter; the best part though is the output stage: a 6AK6 tube is used into a 10k ohm load and promises a .8 watt output. I am not aware of any other hi-fi line output stages with 6AK6s; def want to try it. .8 watts output would very welcome in many of my builds… can’t get enough of that clean headroom…
Here’s the schematic (included in the download as well).
3 replies on “Multi-use vacuum-tube audio mixer circa 1960”
Might the S-15 (12W PP) output transformer specified in this schematic be a typo? I would think that the correct UTC would be S-14 (single ended). If this is not a typo, I’m thinking of doing something similar to this with a UTC S-16 I have (30W PP) by running the DC through the whole 10K primary. What is your call on this? What might be the reason for specifying a S-15 instead of S-14?
Cheers
Hi chris. some of those ‘universal’ UTC O/Ps could handle DC on the primary. I don’t know for sure which ones. but its risky. and their frequency response sucks anyways. if i was gonna build this, i’d use a utc A25. good luck. c.
I’m trying to find schematics for a 60’s lang portable mixer and equilizer.