Categories
Pro Audio Archive

More outboard gear of the early 60’s

The Pultec range of 1961: the Pultec EQP-1S program equalizer, EQH-2 program equalizer, HLF-3C high and low pass filter set, MB-1 mic and booster amp, and Mavec micpre/EQ unit.

Pultec equalizers have enjoyed fifty-plus years of popularity among recording professionals.  Much like the first several compressors released by Universal Audio/UREI, they have never really gone out of style.  And if vintage Pultecs seem expensive these days (and they no doubt are…), remember that there is an inflation factor of 11x from 1961 to 2012.  So the value of these pieces has more or less simply risen with inflation.

Download catalog data on the EQP 1, shown above: Pultec_EQP-1

Download catalog data on the EQH 2, shown above: Pultec_EQH

Download catalog data on the HLF, shown above: Pultec_HLF-3

The Pultec MEQ-5 and SP-3 Stereo Panner of 1962.  As unlikely as it might seem, the ‘pan’ knob was, at one time, a new and novel concept. 

*************

*******

***

*

Ok so these are not outboard so much as inboard but you get the connection.  The Langevin EQ-252A, EQ-251-A, and EQ-255 filters of 1961.

************

********

***

*

Above: the Universal Audio 175B limiter is announced.  The 175B is quite similar in operational principle to the Altec 436/8 and the Gates Sta-Level but the UA is far more sophisticated.  Just a really smartly designed piece of AFAIK, it was sold like shown, with no top cover.   gear.  Retro Instruments currently makes a reissue of this classic piece (but with a top cover).

Above: an inexpensive studio echo unit of the early 1960s: the Telefunken Echo Mixer. It is a spring-reverb unit.  Click this link for an audio demo.   Apparently used by Klaus Schulze on his “Irrlicht,” which is one of my favorite records.


Categories
Pro Audio Archive

Audio Mixing Consoles circa 1959

Langevin stereo console circa 1959

Today: from the “Audio Cyclopedia,” Howard Tremaine, 1959: a quick visual survey of professional mixing consoles in service in 1959.  A PS Dot Com reader turned me on to the “Audio Cycolopedia”; many copies of this 1300ppp volume are available on Amazon and eBay starting at around $80; based on the number available, though, i feel like there’s a $1 yard-sale copy waiting for me just around the bend…  When the moment presents itself, we’ll be sure to run an Out-Of-Print-Book Report.

A Westrex console built for Todd-AO

The Westrex Portable Stereo Mixer, inside+out

RCA Stereo Console built for 20th Century Fox

A ten-channel stereo console built for the production of USAF training films

An eight-channel Western Electric console

Cinema Engineering Console with integral channel equalization.  These consoles were apparently introduced in 1951…

…as seen in this image from Radio & Television News, 1951.  We’re looking at Capitol Records’ studio in this image.

“Audio Cyclopedia” presents a range of material in an easy-to-read manner suitable for technical and non-technical persons alike; that being said, the book does not shy away from some very useful circuit data, such as the above-depicted Magnasync mixer schematic.  I have been wondering for some time what the proper way was to use a 5879 tube in triode mode: here we see:  100k plate resistor with 1K bias resistor.  Easy…

Categories
Pro Audio Archive

Lang Audio of the 1960s

Download the six-page circa 1965 Lang Specialized Audio Equipment Catalog:

DOWNLOAD: Lang_Audio_Electronics_catalog

Products covered, with photos and text description, include: Lang LRP-1B tape recorder electronics (for Ampex 300 generation machines), LTP-1A tape playback amp, LRA-1C record/playback amp, LMX-4 and LMX-5 broadcast consoles, LMP-1 stereo portable mixer, Record Stereo Mixer, LMX-2 mixer, LPM-2 portable mixer, PEQ-2 and PEQ-3 equalizers, Lang Sync Panel, Disc Recording Equalizer, plus many more accessories.

*******************************************

*******************************************

Lang was known primarily for the various upgrades and support equipment that they manufactured for Ampex tape machines.  As shown above, they also offered solid-state equalizer that appear similar in function to the popular Pultec units of the era.  There are also several models of audio mixers on offer, a few of which were available as early as 1961.

Above: the Lang ‘compact’ mono mixer.  Advert circa 1961.  Looks very similar to my later stereo Gately mixing system , which I spent $250 and several hours on…and i still can’t figure out what the hell i’m gonna use it for.

Above: the Lang Raecord portable stereo (of a sort…) mixer, also introduced circa 1961.    Seems pretty scarce.

Categories
Manufacturers Pro Audio Archive

Fairchild Kit Of The Early 1960s

Above: the Fairchild 661 Auto-ten (a noise gate, apparently), 740 Lathe, 602 and 600 Conax (de-essers, apparently), 670 stereo limiter, 663 Compact console channel compressor, and 666 compressor, which wants you to know that it is emphatically NOT a vari-mu compressor.

Today on PS dot com: some pro audio gear from NYC’s legendary Fairchild Recording Equipment Corporation.  This post will strictly be a scan of marketing materials from the era, as I have never used or serviced any of these pieces (other than a 670 clone).   A PS Dot Com reader alerted me to the fascinating story of Sherman Fairchild, the man behind the corporation that brought the world this very advanced audio technology: you will not be surprised to learn that he had roots in the aviation industry and a key connection to IBM.  See the comments section or click here to learn more.

this gets a little lengthy so click below to READ ON…

Categories
Pro Audio Archive Recording Studio History

This month at PS Dot Com: Pro Audio Equipment of the early 1960s

I do not trust you, microphone.  Yet.  

The next few weeks at Preservation Sound: we bring you: in no particular order: some of the state-of-the-art in studio recording equipment of the early 1960s.  A period that I like to refer to as the ‘pre-rock-era.’  As-in, Rock And Roll existed, but Rock?  That was at least one Ed Sullivan show/protest song/freedom march/long haircut/draft card/Godard film away.  Also of note: the period 1960-1963 was also the end-of-the-line of the first Golden Age of vacuum tube audio development.  Although new valves and valve-operated products were still being introduced, it was only a short while before Solid State became the defacto state-of-the-art.

Enjoy the material, and as always… if any of y’all are using this kit in the studio these days, drop us a line and let us know…

Categories
Pro Audio Archive Uncategorized

UDPATED (4): Presto Recording Corp: Pioneers of ‘Instant’ Analog Disc Recording

Download the fifty-page 1940 PRESTO RECORDING CORP catalog:

DOWNLOAD (part 1): Presto_1940_Cat_1

DOWNLOAD (part 2):Presto_1940_cat_2

Products covered, with text, some specs, and photos, include: Presto Model A, Model B, Model F recording installations; Presto Model C, Model Y, and Model K portable recorders; Presto type 8-A, 8-B, 28-A, 6-D, 6-E, 6-F, 26-B, 75-A, 75-B, 75-C, 9-A, and 9-B  recording turntables; Type 62-A transcription turntable; Automatic Equalizer 160; blower system 400; 150 and 151 pickups; Microphone Mixer type 130-A, B, C; Preamplifier type 40-A and 40-B; Presto radio tuner 50-A and 50-B; Recording Amplifiers  85-A, B, 85-E, 87-A and 87-B; plus a range of parts and accessories including Green Seal discs, Orange Seal discs, and Blue Label discs.

Above, the Presto Model A, their top-of-the-line system circa 1940.

Presto Recording Corp was a pioneer of coated-disc ‘Instantaneous Recording.’  From 1933 through the end of WWII, Presto was the US leader in providing high-quality recording equipment to broadcasters, schools, studios, and government.  There is a detailed history of the Presto Corp provided at this website, so no need to re-tread those waters.  Basically, what Presto offered was a way to make good-sounding LP and 78 recordings that could be played back instantly on any home turntable.  Unlike earlier commercial recording technologies, there was no intermediate submaster required.  Presto was able to do this by having designed an aluminum (later, glass) disc that was coated with a special cellulose-based compound (featuring 51 ingredients!).

At right, the Presto 200-A Electronics package.  This was a complete system of microphone preamps, cutting amps, patchbay, and AM radio tuner that was designed to accompany the Model-A pictured above.  Presto’s ‘instant-disc’ technology was basically rendered obsolete by the development of magnetic tape recorders in the late 1940s, most notably, AMPEX (and to lesser degree, Magnecord).   The specs for the better Presto systems weren’t awful: 50-8000hz frequency range, 50db signal-to-noise ratio; but this paled in comparison to the German Magnetophon technology that AMPEX built on, with a high-frequency response to 15,000hz.

On a more basic user-level: you could always record-over a piece of magnetic tape; but cutting into a lacquer-coated disc (at $16/unit in today’s money) was a commitment.

Presto Model C, their top-end portable system of 1940 ($20,000 in 2011 dollars; 138 lbs)

Looking through this catalog, the most fascinating aspect is the large range of mechanical devices and accessories recommended to insure the fidelity of the audio.  Nowadays almost all audio control happens electronically; once the room is treated and the microphone carefully placed, our work as recording engineers leaves the realm of physical manipulation and enters a world of electronic control.  In the era of analog disc recording, though, a careful recording engineer needed blowers…

…to efficiently remove the bits of cellulose material that the cutting needle carved out the the recording blanks;

viscous-oil-filled dampers to regulate vertical movement of the cutting head (a mechanical audio compressor, I would imagine);

…an optical microscope to examine the grooves that you just cut for quality-control purposes…

fresh sharp needles to do the actual cutting work…and, if you wanted the ultimate in convenience, an ‘automatic equalizer’ to automatically boost the treble frequencies as the cutting head moved closer to the center of the disc (since discs spin at a constant rate, as the needle gets closer to the center of the disc, the actual linear speed of the needle relative to the surface medium gets slower, and as we know well in all types of analog recording, slower equals less high-end).

Above, the Presto 40-A microphone pre-amplifier, the one piece of equipment in this lengthy catalog that could still be of potential use to modern recordists.  It uses two 1221 tubes to deliver 55dbs of gain (from what I can gather, 1221s are interchangeable with 6C6, the 6C6 being the predecessor to the 6J7, likely making these 40As likely very similar to RCA BA1/2/11 series mic preamps).  If anyone has the schematic to the Presto 40 mic preamp, please send it to us…  coincidentally I built a preamp with 6C6s a few years ago (based on a schematic from an ancient UTC catalog) and I liked the results.

UDPATE:

Thank-you to reader EL for sending us the schem to the Presto 40-A.  Here ’tis as a download: PRESTO Type 40-A preamp schematic

…And here as well:

This must be a slightly later version of the 40-A, as the 2nd tube is a 6SJ7, which is a variant of the 6J7 that has the input grid connection in the base rather than on the top.  Other things to note: the input transformer spec’d is an ‘LS-10,’ which I can only assume means the UTC LS-10…  circuit-wise, we have the first 6J7 connected in pentode, coupled by a .1uf cap to the 2nd 6SJ7 stage, this time wired in Triode in order to more easily drive the output transformer.  A ’50M’ resistor (or as we know them, 50K ohms) provides negative feedback from stage 2 to stage one.  Thinking that this circuit could be nice as the back end to a 3-stage pre, maybe with a something low-gain like a 76 or 6J5 on the front end with a volume pot following.

UPDATE (2)

EL also provided some images of his particular 40A units… check ’em out…

Pretty amazing that these things made it all the way to Australia way back when… my lord can you imagine how much these things must have cost in their day?

***********

*******

***

*

*************

*******

***

Update Sept 2013:

E.L. directed us to this eBay auction; a Presto 40a in nice condition (Nashville, TN) sold for $510.  Here are some images:

Presto_case

Presto_circuit Presto_inside2 Presto_Interior1 Presto_label Presto_output_trans************

*******

***

Anyone out there using any Presto equipment in their work?  Drop a line and tell us about it….

 UPDATE: a friend has alerted us to The 78 project, a series of new recordings of notable musicians made using just a Shure 51 mic and a Presto disc recorder.  They sound great, and in the videos you can hear both the modern production-sound of the session via the camera audio-track and the actual 78 playback.  Very interesting contrast…

 

Categories
Altec Pro Audio Archive

Pro Audio hardware of the early 1950s

The General Electric (GE) BA-5-A Limiter

Continuing our review of the first two years of AUDIO magazine, today we will look at some of the more interesting bits of pro audio kit in evidence during 1954/1955.  AUDIO magazine had just made the transition to its new moniker in the wake of the introduction of the AES Journal (Audio Engineering Society), and for the moment, AUDIO sill covered a bit of the pro audio equipment that would soon largely leave its pages.

The GE BA-5 pictured above is, AFAIK, the largest and most complicated analog audio compressor ever made.  Although it has much less tubes, it’s kinda even more sophisticated than the Fairchild 660/670.    Here’s the schematic if you are interested.  From what i recall,  the BA-5 works by creating an ultra high frequency sidechain to obtain the control voltage value for the compression; I can’t recall the details at the moment but the basic concept was to allow the unit to have huge amounts of compression with very fast timings, but without any pumping or dipping artifacts.  Which was also the intent of the 660/670 design.  If anyone out there has a better explanation of this monster, please chime in.

The General Electric BA-6-B remote amplifer/mixer

The General Electric BA-9-A compressor, a much more basic pro audio compressor.  Circuit is essentially the same as the Gates Sta-Level.  The BA-9 is also known as the the uni-level; schematics are readily available online.

The General Electric BA-1-F plug-in preamp and BA-12-C plug-in power amp

The Hycor 4201 equalizer.  Similar to a Pultec program EQ but without the makeup gain amp; the Hycor is a fully passive device.

Langevin 5116 modular preamp

The full Langevin modular line of 1954: 5116 preamp, 5117 power amp, and 5206, 5208 power supplies

Another remote amp from 1954 – the Magnasync G-924.  Looks very cool.  Magnasync would soon be merged with the Moviola corporation and become a brand name for sound-for-film equipment.  See this previous post for an experiment with the Magnsync URS device.

An early ad (1955) for the Altec 604 duplex loudspeaker.  The 604 would remain a studio-standard recording/mixing monitor speaker well into the 1970s.

Okay this is getting pretty tech-y but here’s an advert announcing some new-ish tubes you might want to consider: the Tung-sol 12AX7 and the 5881 (AKA ruggedized 6L6).   Transistors were on the market at this point (1955) but were a ways off from reaching the performance and reliability that these great tubes offered.

Categories
Magnecord Pro Audio Archive

Magnecord Complete Line Catalog Circa 1953

From the personal archive of John Boyers, founding partner of Magnecord INC, we present the complete circa 1953 Magnecord INC catalog. Click the link below to download the eight-page PDF:

DOWNLOAD: Magnecord_Catalog_Circa1953

Products covered, with text and photos, include: Magnecord PT6-A Recorder Mechanism, PT6-R line-level input amplifier and PT6-J Mic-level input/output amplifier; PT63-A three-head recorder and companion PT63-J amplifier; the full line of PT6-series accessories, including the PT6-HT ‘turnover’ panel, PT6-IM3 and PT6-IM4 microphone-level input mixers, PT6-M ten-inch reel adapter mechanism, PT6-EL continuous loop panel (really confused as to how on earth this thing works).  Also includes the Magnecord PT7-A, PT7-M, PT7-C series of recorders/amplifiers, which offered slightly improved audio specs relative to the PT-6 series.

Click the ‘Magnecord’ link in the right-hand ‘Categories’ column of the homepage to see much more Magnecord coverage on PS dot com.

 

Categories
Microphones Pro Audio Archive

Studio Microphones of 1954

AKG D36 advert from 1954

Continuing our survey of AUDIO magazine’s early years: over the next couple of weeks we will look at some of the more relevant content from the first two years that this venerable publication ran under the title ‘Audio,’ the prior title having been ‘Audio Engineering.’ (full backstory here and here).  We’ll start today with the crop of studio microphones on the market in 1954.  One thing becomes pretty clear: the Austrians were really ahead of their time.AKG C-12 advert 1954

*****************

Telefunken U-47 and 201-M adverts 1954

Capps CM 2001, 2030, 2250, and DM 2050 microphones c. 1954.

Anyone have any experience with these mics?  Look interesting.  Let us know…

The Reeves S-T Condenser Microphone; another early American Condenser mic. Very rare.

The Shure 333 ribbon mic.  This was their cardiod ribbon.  I’ve never used one of these, but i would love to get my hands on one.  Stephen Sank recently re-ribboned my circa 1954 Shure 300 (the 300 was Shure’s high-end figure-8 ribbon of the same period) and wow did he do a great job.  It sounds incredible now.    I had thought it was a P.O.S. until he re-did it.  If you own a vintage Shure ribbon mic and you are underwhelmed by it. give Sank a call and see what he can do for you.

…and here is some period analysis of the then-new Shure 333.

Follow the link below to READ-ON….  more studio mics of ’54 follow….

Categories
Guitar Equipment Pro Audio Archive

Vintage Marshall Archive Material Part 2: 1974

Download the complete sixteen-page 1974 Marshall Amplification catalog:

DOWNLOAD: Marshall_1974_Cat

Products covered, with text, specs, and photos, include: Marshall 1959, 1987, 1989, 1992, 2048, 2068, and 1986 tube heads; 1960, 1982, 1990, 2049, 2045, 2069, and 1935 speaker cabinets; Marshall 2064, 2065, and 2052 ‘powercel’ cabinets; Marshall 2040, 2078, and 2077 combo amps; Marshall Disco Unit (yup…) 1993 ‘turntable control unit’; Marshall 2071, 2050, and 2070 mixers; plus a slew of additional P.A. equipment.

I spent yesterday doing the final wiring and installation of my newly-restored Wheatstone SP-6 console into the control room at Gold Coast Recorders.  Took the opportunity to listen to a pile of records that I had not gotten around to.  “The Welsh Connection” by Man really caught my ear, and got me into a real UK Rock circa ’75 kinda mood.  Hence today’s post.

The most interesting bits to the ’74 Marshall Catalog are the 2050 and 2070 mixers, neither of which seem to have survived the 1970s. I cannot find a single reference to them on the web, other than in a book about Marshall.

The much smaller # 2071 mini-mixer remains in evidence; here’s a link to one for sale for a few bucks in Ireland.   A unit cosmetically similar to the 2050 is also available in England right now; price is quite good IMO…

And of course, let’s not forget the Marshall Disco Unit.

Jim Marshall offers some sage advice here as well:

This really is true.  Do not try to Disco alone.  Sad at best.

Finally, we meet the face of Marshall:

Oh that’s the wrong pic.

Here he is:

Follow this link for previous vintage Marshall coverage on PS dot com.